The Pool Blaster CX-1 Cordless Robotic Pool Cleaner by Water Tech is truly revolutionary. The CX-1 is a completely cordless robotic cleaner with an on-board rechargeable battery. The onboard controller is easy to set up and use and the cleaner can be set for a 7-day cleaning cycle or just a one-time cleaning cycle. If your looking for a robotic pool cleaner that is easy to use and set up the CX-1 is perfect for you.

 

There are no cords. No power units. It has a simple cable that you would use to charge the cleaner each week. Plug it in and charge it up and the CX-1 is ready to drive itself into your pool. Yes, you read that correctly, the CX-1 will enter the pool on its own power. Simply set it by the pool edge, point the front towards the pool and turn the power on. It will start up and drive into the pool and then begin it's cleaning cycle. This is a really cool feature!

 

You can set the CX-1 for two different cleaning cycles. A one-time cleaning cycle where the cleaner will run for 4.5 hours and then you would remove it and recharge it for future use. Or a weekly cycle where the cleaner will run for 1.5 hours the first day and then on day 2-7 it will turn on and run for 30 minutes. On day 7 after the cleaning cycle is over simply remove the CX-1 and charge it up for another weekly cleaning cycle. The CX-1 is designed to stay in the pool all week, just remove it and set it on the pool edge if you are going to use your pool that day. After you are done swimming the CX-1 will drive itself into the pool and continue the weekly cleaning cycle.

 

You can also select “Floor Only” or “Floor & Walls” when you turn on the cleaner. The CX-1 is designed to clean the pool floor and the walls up to the waterline. If you don't need it to clean the walls for a particular cycle, just chose “Floor Only” and the CX-1 will stay on the pool floor only. The CX-1 features powerful scrubbing brushes on the front and back and very large debris openings so it will clean just about any pool and leave it spotless all week. The large debris bag on the bottom will filter down to 2 microns.

 

Included is a hook that you can attach to your pool pole to retrieve the CX-1 from the pool bottom. The truly innovative part of this cleaner is that it is cordless. No worries about cable tangling or if you have enough cable for your pool. Or where to plug in the power unit. You just charge the CX-1 up and let it enter your pool and start cleaning. It is truly a revolutionary robotic pool cleaner.

 

Other Great Features
Covers entire pool in only 1 hour
Built-in Air and Tilt Sensors
Cleans floors, walls & most steps
Hand-crafted, using the highest quality components
Removes all debris: algae, sand, leaves etc.
Totally independent: No installation, no hoses no booster pumps, no suction lines
No cables

 

Specifications:
Cleaning Coverage (sq. ft./hr.) 3542 sq. ft./hr.
Minimal Operation Depth: 16 in
Maximum Operation Depth: 15 ft
Run Time: Up to 4 Hours
Charging Time: 6-8 Hours
Cleaning Width: 18.0”
Suction Power: Up to 7200 gals. /hr
Unit Size: 19.85 X 18.0 X 11.0”
Unit Weight: 21 lbs
Shipping Weight: 27 lbs
Retrieval Hook Adapter: Yes
Warranty: 2 years on batteries & motors

Battery Specifications
Battery type: Li-Ion
Battery Configuration: 6S4P

Charger Specifications
AC-DC CHARGER:
Input: 100-240AC Volts 50-60Hz, 115W
Output: 29V